sdl3-sample-简明教程，指导如何在包括移动和 Web 在内的各种平台上构建和使用 SDL3

sdl3-sample-简明教程，指导如何在包括移动和 Web 在内的各种平台上构建和使用 SDL3

sdl3-sample源代码地址为：https://github.com/Ravbug/sdl3-sample

sdl3-example是SDL3的简明教程，指导如何在包括移动和 Web 在内的各种平台上构建和使用 SDL3。还包含 SDL_mixer、SDL_Image 和 SDL_ttf！
在线网站运行示例为：https://www.ravbug.com/sdl3-sample/

https://www.ravbug.com/sdl3-sample/官网在线运行结果：

SDL3 App From Source Minimal Example

This is a minimal example for building and using SDL3, SDL_Mixer, SDL_Image, and SDL_ttf_ from source
using C++ and CMake. It also demonstrates setting up things like macOS/iOS
bundles.
See src/main.cpp for the code.

Building And Running

Are you a complete beginner? If so, read this!
Otherwise, install CMake and your favorite compiler, and follow the commands below:

# You need to clone with submodules, otherwise SDL will not download. git clone https://github.com/Ravbug/sdl3-sample --depth=1 --recurse-submodules cd sdl3-sample cmake -S . -B build 

You can also use an init script inside config/. Then open the IDE project inside build/
(If you had CMake generate one) and run!

Supported Platforms

I have tested the following:

*See further instructions in config/

Note: UWP support was removed from SDL3 during its development. For historical reasons, you can get a working UWP sample via this commit: df270da

Updating SDL

Just update the submodule:

cd SDL git pull cd .. cd SDL_ttf git pull 

You don’t need to use a submodule, you can also copy the source in directly. This
repository uses a submodule to keep its size to a minimum.

Reporting issues

Is something not working? Create an Issue or send a Pull Request on this repository!

当在自己的MacOS、Windows、Ubuntu等Linux系统中安装了CMake安装包后，可以按照官网说的如下命令执行：

# You need to clone with submodules, otherwise SDL will not download.git clone https://github.com/Ravbug/sdl3-sample --depth=1 --recurse-submodules cd sdl3-sample cmake -S . -B build cmake --build build make

在MacOS中运行结果

在Windows11中运行结果

参考资料

• https://github.com/Ravbug/sdl3-sample
• https://www.ravbug.com/sdl3-sample/
• Introduction to SDL with CMake
• https://github.com/libsdl-org/SDL
• https://libsdl.org/
• MacOS下源码安装SDL3并运行hello.c示例程序